Show Oam Ethernet Link-Fault-Management; Table 544: Show Oam Ethernet Link-Fault-Management Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show oam ethernet link-fault-management

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 544: show oam ethernet link-fault-management Output Fields

Field Name Field Description
Indicates the status of the established link.
Status
Fail
Running
State of the discovery mechanism:
Discovery state
Passive Wait
Send Any
Send Local Remote
Send Local Remote Ok
Peer address Address of the OAM peer.
Copyright © 2010, Juniper Networks, Inc.
show oam ethernet link-fault-management
<brief | detail>
<interface-name>
Command introduced in Junos OS Release 9.4 for EX Series switches.
Displays Operation, Administration, and Maintenance (OAM) link fault management
(LFM) information for Ethernet interfaces.
—(Optional) Display the specified level of output.
brief | detail
interface-name —(Optional) Display link fault management information for the specified
Ethernet interface only.
view
Example: Configuring Ethernet OAM Link Fault Management on EX Series Switches
on page 4041
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 4043
show oam ethernet link-fault-management brief on page 4075
show oam ethernet link-fault-management detail on page 4075
Table 544 on page 4071 lists the output fields for the
link-fault-management command. Output fields are listed in the approximate order in
which they appear.
—A link fault condition exists.
—A link fault condition does not exist.
Chapter 142: Ethernet OAM Link Fault Management
show oam ethernet
Level of Output
All levels
All levels
All levels
4071