Ping Mpls Lsp-End-Point - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

ping mpls lsp-end-point

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
ping mpls lsp-end-point prefix-name
<count count>
<destination address>
<detail>
<exp forwarding-class>
<instance routing-instance-name>
<logical-system (all | logical-system-name)>
<size bytes>
<source source-address>
<sweep>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
The size and sweep options were introduced in Junos OS Release 9.6.
The option was introduced in Junos OS Release 10.0.
instance
Check the operability of MPLS label-switched path (LSP) endpoint connections. Type
Ctrl+c to interrupt a ping mpls
—(Optional) Number of ping requests to send. If
count count
requests are sent. The range of values is
.
5
destination address —(Optional) Specify an address other than the default (
for the ping echo requests. The address can be anything within the
—(Optional) Display detailed information about the echo requests sent and received.
detail
—(Optional) Value of the forwarding class for the MPLS ping packets.
exp forwarding-class
instance routing-instance-name
and forwarding equivalence class (FEC) associated with an LSP connection.
logical-system (all | logical-system-name)
systems or on the specified logical system.
prefix-name —LDP forwarding equivalence class (FEC) prefix or RSVP LSP endpoint
address.
—(Optional) Size of the LSP ping request packet. If the endpoint is LDP-based,
size bytes
the minimum size of the packet is
minimum size of the packet is
bytes.
65468
source source-address —(Optional) IP address of the outgoing interface. This address is
sent in the IP source address field of the ping request. If this option is not specified,
the default address is usually the loopback interface (
sweep —(Optional) Automatically determine the size of the maximum transmission unit
(MTU).
Chapter 137: Operational Commands for MPLS
command.
1 through 1,000,000
—(Optional) Ping a combination of the routing instance
—(Optional) Perform this operation on all logical
bytes. If the endpoint is RSVP-based, the
88
bytes. The maximum size in either case is
100
is not specified, five ping
count
. The default value is
127.0.0.1/32
subnet.
127/8
).
lo.0
3739
)