Show Poe Interface; Table 485: Show Poe Interface Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show poe interface

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 485: show poe interface Output Fields

Field Name (All Field Name
Interfaces (Single Interface
Output) Output)
Interface PoE Interface
Admin status Administrative
status
Oper status Operational status
Max power Power limit on the
interface
Priority Priority
3570
®
OS for EX Series Ethernet Switches, Release 10.4
show poe interface
<interface-name>
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the status of PoE interfaces.
none—Display status of all PoE interfaces on the switch.
—(Optional) Display the status of a specific PoE interface on the switch.
interface-name
view
show poe controller on page 3568
Verifying PoE Configuration and Status (CLI Procedure) on page 3550
Monitoring PoE Power Consumption (CLI Procedure) on page 3548
Troubleshooting PoE Interfaces on page 3553
show poe interface on page 3571
show poe interface ge-0/0/3 on page 3571
Table 485 on page 3570 lists the output fields for the
fields are listed in the approximate order in which they appear.
Field Description
Interface name.
Administrative state of the PoE interface:
disabled, it can provide network connectivity, but it cannot provide power to connected
devices.
Operational state of the PoE interface:
ON —The interface is currently supplying power to a powered device.
—PoE is enabled on the interface, but the interface is not currently supplying
OFF
power to a powered device.
—PoE is disabled on the interface.
Disabled
Maximum power that can be provided by the interface.
Interface power priority: either
show poe interface
or
Enabled Disabled
High or Low .
Copyright © 2010, Juniper Networks, Inc.
command. Output
. If the PoE interface is