Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3730

Complete Software Guide for Junos
Table 490: show fip snooping Output Fields (continued)
Field Name
Configured FKA-ADV
Running FKA-ADV
ENode-MAC
Interface
Configured FKA-ADV
Running FKA-ADV
VN-Port MAC
FKA-ADV
show fip snooping show fip snooping
3626
®
OS for EX Series Ethernet Switches, Release 10.4
Field Description
FIP keepalive interval in seconds
configured on the FCF multiplied
by three. For example, if the
FKA_ADV period configured on the
FCF is 86 seconds, the value of this
field is 258.
Runtime interval in seconds of the
last FIP keepalive advertisement
the FCF received. This value
changes every time the FCF
receives an FKA_ADV.
MAC address of the connected
FCoE Node (ENode).
Interface connected to the ENode.
FIP keepalive interval in seconds
configured on the FCF multiplied
by three. For example, if the
FKA_ADV period configured on the
FCF is 86 seconds, the value of this
field is 258. This value remains
constant.
Runtime interval in seconds of the
last FIP keepalive advertisement
the ENode sent to the FCF. This
value changes every time the
ENode sends an FKA_ADV to the
FCF.
MAC address of a VN_Port on the
Enode.
Runtime interval in seconds of the
last FIP keepalive Advertisement
the ENode sent to the FCF on
behalf of the VN_Port (VN_Port
FKA_ADV). This value changes
every time the ENode sends a
VN_Port FKA_ADV to the FCF.
user@switch> show fip snooping
VLAN : fcoevlan1 FC-MAP : 0e:fc:00
FCF : 00:10:94:00:00:01
Enode-MAC : 00:10:94:00:00:02
VN-Port-MAC : 0E:FC:00:00:00:05
VN-Port-MAC : 0E:FC:00:00:00:01
Level of Output
detail
detail
All
detail
detail
detail
All
detail
Session Count : 2
Copyright © 2010, Juniper Networks, Inc.