Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 4225

Table 548: show oam ethernet connectivity-fault-management mep-database Output
Fields (continued)
Field Name Field Description
Number of loopback messages (LBMs) sent.
LBMs sent
Number of loopback response messages (LBRs) received that were valid messages and in sequence.
Valid in-order LBRs
received
Number of LBRs received that were valid messages and not in sequence.
Valid out-of-order LBRs
received
Number of LBRs received that were corrupted.
LBRs received with
corrupted data
LBRs sent Number of LBRs transmitted.
LTMs sent Linktrace messages (LTMs) transmitted.
Linktrace messages received.
LTMs received
Linktrace responses (LTRs) transmitted.
LTRs sent
Linktrace responses received.
LTRs received
Sequence number of the next linktrace message request to be transmitted.
Sequence number of
next LTM request
If the MEP is an initiator for a one-way ETH-DM session: Number of one-way delay measurement
1DMs sent
(1DM) PDU frames sent to the peer MEP in this session.
For all other cases, this field displays
If the MEP is a receiver for a one-way ETH-DM session: Number of valid 1DM frames received.
Valid 1DMs received
For all other cases, this field displays
If the MEP is a receiver for a one-way ETH-DM session: Number of invalid 1DM frames received.
Invalid 1DMs received
For all other cases, this field displays
If the MEP is an initiator for a two-way ETH-DM session: Number of Delay Measurement Message
DMMs sent
(DMM) PDU frames sent to the peer MEP in this session.
For all other cases, this field displays
If the MEP is a responder for a ETH-DM session: Number of Delay Measurement Reply (DMR) frames
DMRs sent
sent.
For all other cases, this field displays
Copyright © 2010, Juniper Networks, Inc.
Chapter 143: Ethernet OAM Connectivity Fault Management
.
0
.
0
.
0
.
0
.
0
4121