Clear Snmp Statistics - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

clear snmp statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear snmp statistics clear snmp statistics
Copyright © 2010, Juniper Networks, Inc.
clear snmp statistics
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Clear Simple Network Management Protocol (SNMP) statistics.
This command has no options.
clear
show snmp statistics on page 3989
clear snmp statistics on page 3965
See show snmp statistics for an explanation of output fields.
In the following example, SNMP statistics are displayed before and after the
command is issued:
statistics
user@host> show snmp statistics
SNMP statistics:
Input:
Packets: 8, Bad versions: 0, Bad community names: 0,
Bad community uses: 0, ASN parse errors: 0,
Too bigs: 0, No such names: 0, Bad values: 0,
Read onlys: 0, General errors: 0,
Total request varbinds: 8, Total set varbinds: 0,
Get requests: 0, Get nexts: 8, Set requests: 0,
Get responses: 0, Traps: 0,
Silent drops: 0, Proxy drops 0
Output:
Packets: 2298, Too bigs: 0, No such names: 0,
Bad values: 0, General errors: 0,
Get requests: 0, Get nexts: 0, Set requests: 0,
Get responses: 8, Traps: 2290
user@host> clear snmp statistics
user@host> show snmp statistics
SNMP statistics:
Input:
Packets: 0, Bad versions: 0, Bad community names: 0,
Bad community uses: 0, ASN parse errors: 0,
Too bigs: 0, No such names: 0, Bad values: 0,
Read onlys: 0, General errors: 0,
Total request varbinds: 0, Total set varbinds: 0,
Get requests: 0, Get nexts: 0, Set requests: 0,
Get responses: 0, Traps: 0,
Silent drops: 0, Proxy drops 0
Output:
Chapter 140: SNMP
clear snmp
3965