Show Ted Protocol; Table 525: Show Ted Protocol Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show ted protocol

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show ted protocol show ted protocol
Copyright © 2010, Juniper Networks, Inc.
show ted protocol
<brief | detail>
<logical-system (all | logical-system-name)>
show ted protocol
<brief | detail>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about the protocols from which the Multiprotocol Label Switching
(MPLS) traffic engineering database learned about its nodes.
—Display standard information about the protocols from which the traffic engineering
none
database learned about its nodes.
—(Optional) Display the specified level of output.
brief | detail
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show ted protocol on page 3829
Table 525 on page 3829 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 525: show ted protocol Output Fields

Field Name Field Description
Protocol that reported the node information:
Protocol name
IS-IS(1)
IS-IS(2)
OSPF
If the protocols provide conflicting information about a node, the protocol with
Credibility
the highest credibility value is the one that the traffic engineering database uses.
Address the protocol uses as the local address.
Self node
user@host> show ted protocol
Protocol name Credibility
IS-IS(2) 2
IS-IS(1) 1
Chapter 137: Operational Commands for MPLS
—(Optional) Perform this operation on all logical
—IS-IS Level 1.
—IS-IS Level 2.
( )—OSPF from the specified area.
area-number
Self node
(highest) corriedale.00(123.456.1.11)
corriedale.00(123.456.1.11)
show ted protocol command.
3829