Show Poe Notification-Control; Table 486: Show Poe Notification-Control Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show poe notification-control

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
3572
®
OS for EX Series Ethernet Switches, Release 10.4
show poe notification-control
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the state of the PoE
SNMP traps.
view
show poe controller on page 3568
show poe interface on page 3570
Verifying PoE Configuration and Status (CLI Procedure) on page 3550
show poe notification-control on page 3573
Table 486 on page 3572 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 486: show poe notification-control Output Fields

Field Name Field Description
FPC slot number.
FPC slot
Status of notification control:
Notification-control-status
notification-control option, which enables or disables PoE
—PoE traps are enabled. An SNMP trap is sent when a PoE
ON
interface is enabled or disabled.
—PoE traps are disabled.
OFF
show poe notification-control
Copyright © 2010, Juniper Networks, Inc.