Table 451: Cos Value Aliases Configuration Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Table 451: CoS Value Aliases Configuration Fields

Field
Code point name
Code point type
Code point value bits
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Click one:
2.
—Adds a code-point alias. Enter information into the code point alias page as
Add
described in Table 451 on page 3431.
Edit —Modifies an existing code-point alias. Enter information into the code point
alias page as described in Table 451 on page 3431.
—Deletes an existing code-point alias.
Delete
Table 451 on page 3431 describes the related fields.
Function
Specifies the name for a code-point—for
example,
Specifies a code-point type. The code-point type
can be DSCP or IP precedence.
Specifies the CoS value for which an alias is
defined.
Changing this value alters the behavior of all
classifiers that refer to this alias.
Defining CoS Code-Point Aliases (CLI Procedure) on page 3432
Monitoring CoS Value Aliases on page 3461
Example: Configuring CoS on EX Series Switches on page 3401
or .
af11 be
Chapter 115: Configuring CoS
Your Action
Enter a name.
Select a value.
To specify a CoS value,
type it in the appropriate
format:
For DSCP CoS values,
use the format xxxxxx,
where x is 1 or 0—for
example, .
101110
For IP precedence CoS
values, use the format
xxx, where x is 1 or
0—for example, 111 .
3431