Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3808

Complete Software Guide for Junos
Meaning
Related
Documentation
3704
®
OS for EX Series Ethernet Switches, Release 10.4
44 Mar 4 15:33:29.839 Selected as active path
43 Mar 4 15:33:29.837 Record Route:
42 Mar 4 15:33:29.835 Up
41 Mar 4 15:33:29.756 Originate Call
40 Mar 4 15:33:29.756 CSPF: computation result accepted 127.0.0.20 127.0.0.40
39 Mar 4 15:33:00.395 CSPF failed: no route toward 127.0.0.11[7 times]
38 Mar 4 15:30:31.412 Clear Call: CSPF computation failed
37 Mar 4 15:30:31.412 CSPF: link down/deleted:
127.0.0.2(127.0.0.1:0)(127.0.0.1)->
0.0.0.0(127.0.0.20:0)(127.0.0.20)
36 Mar 4 15:30:31.379 Deselected as active
35 Mar 4 15:30:31.350 No Route toward dest
34 Mar 4 15:30:31.350 ?????
33 Mar 4 15:30:31.349 127.0.0.12: Down
32 Mar 4 15:29:05.802 Selected as active path
31 Mar 4 15:29:05.801 Record Route:
30 Mar 4 15:29:05.801 Up
29 Mar 4 15:29:05.686 Originate Call
28 Mar 4 15:29:05.686 CSPF: computation result accepted 127.0.0.20 127.0.0.40
27 Mar 4 15:28:35.852 CSPF failed: no route toward 127.0.0.11[132 times]
26 Mar 4 14:25:12.113 Clear Call: CSPF computation failed
25 Mar 4 14:25:12.113 CSPF: link down/deleted:
0.0.0.0(127.0.0.20:0)(127.0.0.20)->
0.0.0.0(10.10.10.10:0)(10.10.10.10)
*Standby secondary_path_lsp_to_240 State: Up
Priorities: 7 0
SmartOptimizeTimer: 180
Computed ERO (S [L] denotes strict [loose] hops): (CSPF metric: 1)
[Output truncated]
As indicated by the
ActivePath
Configuring Path Protection in an MPLS Network (CLI Procedure) on page 3681
Understanding MPLS and Path Protection on EX Series Switches on page 3646
For information on the
show mpls lsp
Junos OS MPLS Applications Configuration Guide at
http://www.juniper.net/techpubs/software/junos/junos95/index.html
127.0.0.20 127.0.0.40
127.0.0.20 127.0.0.40
in the output, the LSP
secondary_path_lsp_to_240
and
show rvsp interfaces
Copyright © 2010, Juniper Networks, Inc.
is active.
commands, see the
.