Address-Mask - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

address
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

address-mask

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
address address;
[edit snmp v3 target-address target-address-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the SNMP target address.
address —IPv4 address of the system to receive traps or informs. You must specify an
address, not a hostname.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Address
address-mask address-mask;
[edit snmp v3 target-address target-address-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Verify the source addresses for a group of target addresses.
combined with the address defines a range of addresses.
address-mask
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Address Mask
Chapter 140: SNMP
3903