Security-Name (Snmp Notifications) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

security-name (SNMP Notifications)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3944
®
OS for EX Series Ethernet Switches, Release 10.4
security-name security-name;
[edit snmp v3 target-parameters target-parameters-name parameters]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the security name used when generating SNMP notifications.
security-name —Identifies the user that is used when generating the notification if the
USM security model is used. Identifies the SNMP community used when generating
the notification if the v1 or v2c security models are used.
NOTE: The access privileges for the group associated with this security name
must allow this notification to be sent.
If you are using the v1 or v2 security models, the security name at the
snmp v3 vacm security-to-group]
name at the
[edit snmp v3 snmp-community community-index]
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Security Name
hierarchy level must match the security
Copyright © 2010, Juniper Networks, Inc.
[edit
hierarchy level.