Parameters; Port - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

parameters

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

port

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
3932
®
OS for EX Series Ethernet Switches, Release 10.4
parameters {
message-processing-model (v1 | v2c | v3);
security-level (none | authentication | privacy);
security-model (usm | v1 | v2c);
security-name security-name;
}
[edit snmp v3 target-parameters target-parameters-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure a set of target parameters.
The remaining statements are explained separately.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Defining and Configuring the Trap Target Parameters
port port-number;
[edit snmp v3 target-address target-address-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure a UDP port number for an SNMP target.
If you omit this statement, the default port is 162.
—Port number for the SNMP target.
port-number
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Port
Copyright © 2010, Juniper Networks, Inc.