Show Route Forwarding-Table - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route forwarding-table

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Copyright © 2010, Juniper Networks, Inc.
show route forwarding-table
<detail | extensive | summary>
<ccc ccc-interface-name>
<destination>
<family family-name>
<label label>
<matching ip_prefix>
<multicast>
<vpn vpn>
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display the Routing Engine's forwarding table, including the network-layer prefixes and
their next hops. This command is used to help verify that the routing protocol process
has relayed the correction information to the forwarding table. The Routing Engine
constructs and maintains one or more routing tables. From the routing tables, the Routing
Engine derives a table of active routes, called the forwarding table.
—Display the routes in the forwarding table.
none
detail | extensive | summary
—(Optional) Display the specified circuit cross-connect interface name for entries to
ccc
match.
destination —(Optional) Display the destination prefix.
—(Optional) Display routing table entries for the specified family:
family family-name
,
ethernet-switching inet
—(Optional) Display route entries for the specified label name.
label label
—(Optional) Display route entries for the specified IP prefix.
matching ip_prefix
multicast —(Optional) Display route entries for multicast routes.
—(Optional) Display route entries for the specified VPN.
vpn vpn
view
Example: Configuring MPLS on EX Series Switches on page 3655
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Configuring MPLS on Provider Switches (CLI Procedure) on page 3686
show route forwarding-table on page 3789
show route forwarding-table summary on page 3790
show route forwarding-table extensive on page 3790
Chapter 137: Operational Commands for MPLS
—(Optional) Display the specified level of output.
, , , ,
inet6 iso mpls vlan classification
.
3787