Security-Model (Snmp Notifications) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
security-model (Group)
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

security-model (SNMP Notifications)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3942
®
OS for EX Series Ethernet Switches, Release 10.4
security-model (usm | v1 | v2c) {
security-name security-name {
group group-name;
}
}
[edit snmp v3 vacm security-to-group]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Define a security model for a group.
—SNMPv3 security model.
usm
—SNMPv1 security model.
v1
—SNMPv2c security model.
v2c
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Security Model
security-model (usm | v1 | v2c);
[edit snmp v3 target-parameters target-parameters-name parameters]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure a group's security model used with sending notifications.
—SNMPv3 security model.
usm
—SNMPv1 security model.
v1
v2c —SNMPv2c security model.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Security Model
Copyright © 2010, Juniper Networks, Inc.