Configuring The Linktrace Protocol; Management; Edit Protocols] Configuration Statement Hierarchy - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Related
Documentation
Configuration Statements for Ethernet OAM Connectivity Fault Management

[edit protocols] Configuration Statement Hierarchy

4086
®
OS for EX Series Ethernet Switches, Release 10.4
[edit protocols oam ethernet connectivity-fault-management action-profile
profile-name]
user@switch# set action interface-down
Configure one or more events under the action profile, the occurrence of which will
3.
trigger the corresponding action to be taken:
[edit protocols oam ethernet connectivity-fault-management action-profile
profile-name]
user@switch# set event event
See the Junos OS Network Interfaces Configuration Guide.

Configuring the Linktrace Protocol

The linktrace protocol is used for path discovery between a pair of maintenance points.
Linktrace messages are triggered by an administrator using the
verify the path between a pair of MEPs under the same maintenance association. Linktrace
messages can also be used to verify the path between a MEP and a MIP under the same
maintenance domain.
To configure the linktrace protocol:
Configure the linktrace path age timer. If no response to a linktrace request is received,
1.
the request and response entries are deleted after the age timer expires:
[edit protocols oam ethernet connectivity-fault-management]
user@switch# set linktrace age time
Configure the number of linktrace reply entries to be stored per linktrace request:
2.
[edit protocols oam ethernet connectivity-fault-management]
user@switch# set linktrace path-database-size path-database-size
Example: Configuring Ethernet OAM Connectivity Fault Management on EX Series
Switches on page 4079
Understanding Ethernet OAM Connectivity Fault Management for an EX Series Switch
on page 4077
Junos OS Network Interfaces Configuration Guide
[edit protocols] Configuration Statement Hierarchy on page 4086
protocols {
connections {
remote-interface-switch connection-name {
interface interface-name.unit-number;
transmit-lsp label-switched-path;
receive-lsp label-switched-path;
}
}
command to
traceroute
Copyright © 2010, Juniper Networks, Inc.