Sample-Rate - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

sample-rate

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
sample-rate {
egress number;
ingress number;
}
[edit protocols sflow],
[edit protocols sflow interfaces interface-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Option number (directly following sample-rate) deprecated and options
and ingress number added in Junos OS Release 10.4 for EX Series switches.
Set the ratios of the number of packets to be sampled in sFlow network traffic monitoring.
For example, if you specify a rate of 1000, every thousandth packet (1 packet out of 1000)
is sampled.
By default, both ingress and egress sample rates are disabled if no global sample rate is
configured.
NOTE: The sample-rate number
deprecated and might be removed from future product releases. We strongly
recommend that you phase out its use.
—Egress qualifier for the sample rate.
egress number
Range: 100–1073741823
Default: 2048
—Ingress qualifier for the sample rate.
ingress number
Range: 100–1073741823
Default: 2048
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 64
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3878
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3873
Chapter 139: sFlow Monitoring Technology
(the global sample-rate) statement has been
egress number
3891