Falling-Threshold - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

falling-threshold

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3918
®
OS for EX Series Ethernet Switches, Release 10.4
falling-threshold integer;
[edit snmp rmon alarm index]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
The lower threshold for the sampled variable. When the current sampled value is less
than or equal to this threshold, and the value at the last sampling interval is greater than
this threshold, a single event is generated. A single event is also generated if the first
sample after this entry becomes valid is less than or equal to this threshold, and the
associated startup-alarm value is equal to falling-alarm value or rising-or-falling-alarm
value. After a falling event is generated, another falling event cannot be generated until
the sampled value rises above this threshold and reaches the
—The lower threshold for the alarm entry.
integer
Range: -2,147,483,648 through 2,147,483,647
Default: 20 percent less than
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Falling Threshold or Rising Threshold
rising-threshold on page 3936
rising-threshold
Copyright © 2010, Juniper Networks, Inc.
rising-threshold .