Mpls - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

mpls

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
3716
®
OS for EX Series Ethernet Switches, Release 10.4
mpls {
interface ( all | interface-name );
label-switched-path lsp-name to remote-provider-edge-switch;
path destination {
<address | hostname> <strict | loose>
}
}
[edit protocols]
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Enable MPLS on the switch.
The remaining statements are explained separately.
MPLS is disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring MPLS on EX Series Switches on page 3655
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Configuring MPLS on Provider Switches (CLI Procedure) on page 3686
Junos OS MPLS Applications Configuration Guide at
http://www.juniper.net/techpubs/software/junos/junos95/index.html
Copyright © 2010, Juniper Networks, Inc.