Table 502: Show Connections Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Output Fields
show connections show connections
show connections brief
Copyright © 2010, Juniper Networks, Inc.
show connections <name> on page 3752
show connections remote-interface-switch on page 3752
show connections status on page 3753
Table 502 on page 3751 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 502: show connections Output Fields

Field Name Field Description
Whether link monitoring is enabled:
CCC and TCC
connections [Link
Monitoring On I Off]
Connection or circuit status. See the output's legend for an explanation of the
Legend for Status
status field values.
(St)
Type of connection:
Legend for
connection types
if-sw
rmt-if
will display a state
Type of circuit:
Legend for circuit
types
intf
tlsp
rlsp
Name of the configured CCC connection.
Connection/Circuit
Type of connection.
Type
State of the connection.
St
Time that the connection or circuit last transitioned to the
Time last up
state.
Number of times that the connection or circuit has transitioned to the
# Up trans
(operational) state.
user@switch> show connections
Connection/Circuit
ge1-to-pe2
1
ge-0/0/5.0
lsp_pe1_to_ge1_pe2
lsp_pe2_to_ge1_pe1
user@switch> show connections brief
Chapter 137: Operational Commands for MPLS
—Layer 2 switching cross-connect.
—Remote interface switch. While graceful restart is in progress,
(St) of Restart
—Interface circuit.
—Transmit LSP circuit.
—Receive LSP circuit.
Type St
rmt-if Up
intf Up
tlsp Up
rlsp Up
command.
show connections
or .
On Off
.
(operational)
Up
Time last up # Up trans
Jun 26 18:37:25
rmt-if
Up
3751