Remote-Mep (Ex Series Switch Only); Operational Commands For Ethernet Oam Connectivity Fault Management - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

remote-mep (EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

Operational Commands for Ethernet OAM Connectivity Fault Management

Copyright © 2010, Juniper Networks, Inc.
remote-mep mep-id {
action-profile profile-name;
}
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name mep mep-id]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Specify the numeric identifier of the remote maintenance association end point (MEP)
within the maintenance association.
—Specify the numeric identifier of the MEP.
mep-id
Range: 1 through 8191
The remaining statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
Chapter 143: Ethernet OAM Connectivity Fault Management
4105