Targets - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

targets

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3952
®
OS for EX Series Ethernet Switches, Release 10.4
targets {
address;
}
[edit snmp trap-group group-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure one or more systems to receive SNMP traps.
address —IPv4 or IPv6 address of the system to receive traps. You must specify an address,
not a hostname.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring SNMP Trap Groups
Copyright © 2010, Juniper Networks, Inc.