Show Rsvp Session - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show rsvp session

Syntax
Release Information
Description
Options
Required Privilege
Level
3804
®
OS for EX Series Ethernet Switches, Release 10.4
show rsvp session
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<down | up>
<interface interface-name>
<lsp-type>
<name session-name>
<session-type>
<statistics>
<te-link te-link>
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about Resource Reservation Protocol (RSVP) sessions.
—Display standard information about all RSVP sessions.
none
brief | detail | extensive | terse
bidirectional | unidirectional
unidirectional RSVP sessions only, respectively.
down | up —(Optional) Display only LSPs that are inactive or active, respectively.
—(Optional) Display RSVP sessions for the specified interface
interface interface-name
only.
lsp-type —(Optional) Display information about RSVP sessions with regard to LSPs:
—Sessions used for bypass LSPs.
bypass
—Sessions used to set up LSPs.
lsp
—Sessions not used to set up LSPs.
nolsp
name session-name —(Optional) Display information about the named session.
—(Optional) Display information about a particular session type:
session-type
—Sessions that terminate on this switch.
egress
ingress —Sessions that originate from this switch.
—Sessions that transit through this switch.
transit
statistics —(Optional) Display packet statistics.
—(Optional) Display sessions with reservations on the specified
te-link te-link
traffic-engineered link name.
view
—(Optional) Display the specified level of output.
—(Optional) Display information about bidirectional or
Copyright © 2010, Juniper Networks, Inc.