Trap-Options; Type - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

trap-options

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation

type

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3956
®
OS for EX Series Ethernet Switches, Release 10.4
trap-options {
agent-address outgoing-interface;
source-address address;
}
[edit snmp]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Using SNMP trap options, you can set the source address of every SNMP trap packet
sent by the router to a single address, regardless of the outgoing interface. In addition,
you can set the agent address of each SNMPv1 trap. For more information about the
contents of SNMPv1 traps, see RFC 1157.
The remaining statements are explained separately.
Disabled
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring SNMP Trap Options
type (inform | trap);
[edit snmp v3 notify name]
Statement introduced before Junos OS Release 7.4.
inform option added in Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the type of notification.
inform —Defines the type of notification as an inform. SNMP informs are confirmed
notifications.
—Defines the type of notification as a trap. SNMP traps are unconfirmed notifications.
trap
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring SNMP Informs
Configuring the SNMPv3 Trap Notification
Copyright © 2010, Juniper Networks, Inc.