Interface - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

interface

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3560
®
OS for EX Series Ethernet Switches, Release 10.4
interface (all | interface-name) {
disable;
maximum-power watts;
priority (high | low);
telemetries {
disable;
duration hours;
interval minutes;
}
}
[edit poe]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify a PoE interface to be configured.
all —All PoE interfaces on the switch that have not been individually configured for PoE.
If a PoE interface has been individually configured, that configuration overrides any
settings specified with
interface-name —Name of the specific interface being configured.
If you use the statement without any substatements, PoE is enabled on all
interface
interfaces or the specified interface with default values for the remaining statements.
The remaining statements are explained separately.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Configuring PoE Interfaces with Different Priorities on an EX Series Switch
on page 3537
Configuring PoE (CLI Procedure) on page 3543
.
all
Copyright © 2010, Juniper Networks, Inc.