Age (Ex Series Switch Only); Auto-Discovery (Ex Series Switch Only) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

age (EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation

auto-discovery (EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
4094
®
OS for EX Series Ethernet Switches, Release 10.4
age (30m | 10m | 1m | 30s | 10s);
[edit protocols oam ethernet connectivity-fault-management linktrace]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure the time to wait (in minutes or seconds) for a response. If no response is
received, the request and response entry is deleted from the linktrace database.
10 minutes
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
auto-discovery;
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name mep mep-id]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Enable the MEP to accept continuity check messages from all remote MEPs.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
Copyright © 2010, Juniper Networks, Inc.