Table 424: Create A New Filter; Table 425: Create A New Term - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Table 424: Create a New Filter

Field Function
Filter tab
Filter type Specifies the filter type: port/VLAN firewall filter or
router firewall filter.
Filter name Specifies the name for the filter.
Select terms to be part Specifies the terms to be associated with the filter. Add
of the filter new terms or edit existing terms.
Association tab
Port Associations Specifies the ports with which the filter is associated.
NOTE: For a port/VLAN filter type, only Ingress direction
is supported for port association.
VLAN Associations Specifies the VLANs with which the filter is associated.
NOTE: Because router firewall filters can be associated
with ports only, this section is not displayed for a router
firewall filter.

Table 425: Create a New Term

Field Function
Term Name Specifies the name of the term.
Protocols Specifies the protocols to be associated with
the term.
Copyright © 2010, Juniper Networks, Inc.
Add—Select this option to create a new filter. Enter information as specified in Table
424 on page 3297.
Edit—Select this option to edit an existing filter. Enter information as specified in
Table 424 on page 3297.
Delete—Select this option to delete a filter.
Term Up—Select this option to move a term up in the filter term list.
Term Down—Select this option to move a term down in the filter term list.
Chapter 108: Configuring Firewall Filters
Your Action
Select the filter type.
Enter a name.
Click Add to add new terms. Enter
information as specified in Table 425 on
page 3297 and Table 426 on page 3298.
1. Click
Add
2. Select the direction: Ingress or Egress.
3. Select the ports.
4. Click
OK
1. Click
Add
2. Select the direction: Ingress or Egress.
3. Select the VLANs.
4. Click
OK
Your Action
Enter a name.
1. Click .
Add
2. Select the protocols.
3. Click OK .
.
.
.
.
3297