Target-Parameters - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

target-parameters

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
target-parameters target-parameters-name {
profile-name;
parameters {
message-processing-model (v1 | v2c | V3);
security-level (authentication | none | privacy);
security-model (usm | v1 | v2c);
security-name security-name;
}
}
target-parameters target-parameters-name; # syntax for the statement at the [edit snmp
v3 target-address target-address-name] hierarchy level.
[edit snmp v3]
[edit snmp v3 target-address target-address-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the message processing and security parameters to be used in sending
notifications to a particular management target when included at the [edit snmp v3]
hierarchy level. The remaining statements at this level are explained separately.
Apply the target parameters configured at the
hierarchy level to the target-address configuration at the
target-parameters-name]
snmp v3] hierarchy level.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Defining and Configuring the Trap Target Parameters
Applying Target Parameters
Chapter 140: SNMP
[edit snmp v3 target-parameters
[edit
3951