Hold-Interval (Oam Cfm, For Ex Series Switch Only); Interface (Oam Cfm, For Ex Series Switch Only) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

hold-interval (OAM CFM, for EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

interface (OAM CFM, for EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
hold-interval minutes;
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name continuity-check]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure the time to wait before flushing the maintenance association end point (MEP)
database, if no updates occur.
—Time to wait, in minutes.
minutes
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
interface (interface-name | ((ge- | xe-) (fpc/pic/port | fpc/pic/port.unit-number |
fpc/pic/port.unit-number vlan vlan-id)));
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name mep mep-id]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure IEEE 802.1ag Operation, Administration, and Management (OAM) Connectivity
Fault Management (CFM) support for the specified interface.
—Interface to which the MEP is attached. It can be a physical Ethernet
interface-name
interface or a logical interface. If the interface is a trunk interface, the VLAN associated
with the interface must have a VLAN ID.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
Chapter 143: Ethernet OAM Connectivity Fault Management
4097