Hardware-Timestamp; History-Size - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Usage Guidelines
Required Privilege
Level

hardware-timestamp

Syntax
Hierarchy Level
Release Information
Description
Usage Guidelines
Required Privilege
Level

history-size

Syntax
Hierarchy Level
Release Information
Description
Options
Usage Guidelines
Required Privilege
Level
Copyright © 2010, Juniper Networks, Inc.
See Configuring Real-Time Performance Monitoring.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
hardware-timestamp;
[edit services rpm probe owner test test-name]
Statement introduced in Junos OS Release 8.1.
Statement applied to MX Series routers in Junos OS Release 10.0.
Statement introduced in Junos OS Release 10.3 for EX Series switches.
On MX Series routers and EX Series switches only, enable timestamping of RPM probe
messages in the Packet Forwarding Engine host processor. This feature is supported only
with ,
icmp-ping icmp-ping-timestamp
See Configuring RPM Timestamping.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
history-size size;
[edit services rpm bgp],
[edit services rpm probe owner test test-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Specify the number of stored history entries.
size —A value from 0 to 255.
Default: 50
See Configuring BGP Neighbor Discovery Through RPM or Configuring RPM Probes.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Chapter 141: Real-Time Performance Monitoring (RPM)
, , and
udp-ping udp-ping-timestamp
probe types.
4015