Disable - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

disable

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
3556
®
OS for EX Series Ethernet Switches, Release 10.4
disable;
[edit poe interface (all | interface-name)],
[edit poe interface (all | interface-name) telemetries],
[edit poe notification-control fpc slot-number]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Disable a PoE interface, disable the collection of power consumption data for a PoE
interface, or disable the generation of the PoE SNMP traps. The action of the
statement depends on which statement it is used with:
When used with
interface
operates as a standard network access interface, and power is no longer allocated to
it from the PoE power budget. Although the PoE capability is disabled, the PoE
configuration for the interface is retained. To re-enable the PoE capability of this
interface, delete the disable
When used with
telemetries
for this interface. Any previously collected records are deleted. However, the
configuration is retained, including the values for
record collection, delete the
configuration.
When used with notification-control
re-enable PoE traps, delete the
in the configuration.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Configuring PoE Interfaces with Different Priorities on an EX Series Switch
on page 3537
Configuring PoE (CLI Procedure) on page 3543
—Disable the PoE capability of this interface. The interface
statement from the interface
—Disable the collection of PoE power consumption records
interval
statement from the
disable
—Disable the generation of PoE SNMP traps. To
statement from the
disable
disable
entry in the configuration.
telemetries
and duration . To re-enable
entry in the
telemetries
notification-control
Copyright © 2010, Juniper Networks, Inc.
entry