Probe-Type - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

probe-type

Syntax
Hierarchy Level
Release Information
Description
Options
Usage Guidelines
Required Privilege
Level
Copyright © 2010, Juniper Networks, Inc.
probe-type type;
[edit services rpm bgp],
[edit services rpm probe owner test test-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Specify the packet and protocol contents of a probe.
—Specify one of the following probe type values:
type
http-get —(Not available at the [edit services rpm bgp] hierarchy level.) Sends a
Hypertext Transfer Protocol (HTTP) get request to a target URL.
—(Not available at the [edit services rpm bgp] hierarchy level.)
http-metadata-get
Sends an HTTP get request for metadata to a target URL.
—Sends ICMP echo requests to a target address.
icmp-ping
—Sends ICMP timestamp requests to a target address.
icmp-ping-timestamp
tcp-ping —Sends TCP packets to a target.
—Sends UDP packets to a target.
udp-ping
udp-ping-timestamp —Sends UDP timestamp requests to a target address.
See Configuring BGP Neighbor Discovery Through RPM or Configuring RPM Probes.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Chapter 141: Real-Time Performance Monitoring (RPM)
4021