Maintenance-Association (Ex Series Switch Only) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

maintenance-association (EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
4100
®
OS for EX Series Ethernet Switches, Release 10.4
maintenance-association ma-name {
continuity-check {
hold-interval minutes;
interval (10m | 10s | 1m | 1s| 100ms);
loss-threshold number;
}
mep mep-id {
auto-discovery;
direction down;
interface interface-name;
remote-mep mep-id {
action-profile profile-name;
}
}
}
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure the name of the maintenance association in IEEE-compliant format.
—The name of the maintenance association within the maintenance domain.
ma-name
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
Copyright © 2010, Juniper Networks, Inc.