Show Sflow; Table 529: Show Sflow Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show sflow

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 529: show sflow Output Fields

Field Name
sFlow
Sample rate egress
Sample rate ingress
Sample limit
Polling interval
Agent ID
3894
®
OS for EX Series Ethernet Switches, Release 10.4
show sflow
<collector>
<interface>
Command introduced in Junos OS Release 9.3 for EX Series switches.
Display default sFlow technology configuration information.
—Display default sFlow technology configuration information.
none
collector —(Optional) Display standard status information about the specified sFlow
collector.
—(Optional) Display standard status information about the specified sFlow
interface
interface.
view
show sflow interface on page 3897
show sflow collector on page 3896
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3873
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3878
show sflow on page 3895
Table 529 on page 3894 lists the output fields for the
are listed in the approximate order in which they appear.
Field Description
Status of the feature:
enabled
Rate at which egress packets are sampled.
Rate at which ingress packets are sampled.
Number of packets sampled per second. The sample limit cannot
be configured and is set to 300 packets/second.
Interval at which the sFlow agent polls the interface.
The IP address assigned to the sFlow agent.
show sflow
or .
disabled
Copyright © 2010, Juniper Networks, Inc.
command. Output fields
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels