Pdu-Interval; Pdu-Threshold - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

pdu-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

pdu-threshold

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
4068
®
OS for EX Series Ethernet Switches, Release 10.4
pdu-interval interval;
[edit protocols oam ethernet link-fault-management interface interface-name]
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Specify the periodic OAM PDU sending interval for fault detection. It is used for IEEE
802.3ah Operation, Administration, and Maintenance (OAM) link fault management
(LFM) support.
interval—Periodic OAM PDU sending interval.
Range: 400 through 1000 milliseconds
Default: 1000 milliseconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring Ethernet OAM Link Fault Management on EX Series Switches
on page 4041
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 4043
pdu-threshold threshold-value;
[edit protocols oam ethernet link-fault-management interface interface-name]
Statement introduced in Junos OS Release 9.4 for EX Series switches.
Configure how many protocol data units (PDUs) are missed before declaring the peer
lost in Ethernet OAM link fault management (LFM) for all interfaces or for specific
interfaces.
—Number of PDUs missed before declaring the peer lost.
threshold-value
Range: 3 through 10 PDUs
Default: 3 PDUs
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 4043
Copyright © 2010, Juniper Networks, Inc.