Monitoring Cos Forwarding Classes - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Table 460: Summary of Key CoS Classifier Output Fields (continued)
Field
Incoming CoS Value
Assign to Forwarding Class
Assign to Loss Priority
Related
Documentation

Monitoring CoS Forwarding Classes

Purpose
Action
Meaning
3456
®
OS for EX Series Ethernet Switches, Release 10.4
Values
CoS value of the incoming packets, in bits.
These values are used for classification.
Forwarding class that the classifier assigns
to an incoming packet. This class affects the
forwarding and scheduling policies that are
applied to the packet as it transits the
switch.
Loss priority value that the classifier assigns
to the incoming packet based on its CoS
value.
Defining CoS Classifiers (CLI Procedure) on page 3432
Defining CoS Classifiers (J-Web Procedure) on page 3434
Example: Configuring CoS on EX Series Switches on page 3401
View the current assignment of class-of-service (CoS) forwarding classes to queues on
the switch.
To monitor CoS forwarding classes in the J-Web interface, select Monitor>Class of
Service>Forwarding Classes.
To monitor CoS forwarding classes in the CLI, enter the following CLI command:
show class-of-service forwarding-class
Table 461 on page 3457 summarizes key output fields for CoS forwarding classes.
Additional Information
Copyright © 2010, Juniper Networks, Inc.