Revert-Timer - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

revert-timer

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
3720
®
OS for EX Series Ethernet Switches, Release 10.4
revert-timer seconds;
[edit protocols mpls],
[edit protocols mpls label-switched-path lsp-name]
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Specify the amount of time that a label switched path (LSP) must wait before traffic
reverts to a primary path. If during this time the primary path experiences any connectivity
problem or stability problem, the timer is restarted.
If you have configured a value of 0 seconds for the
switched to the secondary path, the traffic remains on that path indefinitely. It is never
switched back to the primary path unless you intervene.
60 seconds
—Value in seconds.
seconds
Range: 0 through 65,535 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Path Protection in an MPLS Network (CLI Procedure) on page 3681
statement and traffic is
revert-timer
Copyright © 2010, Juniper Networks, Inc.