Mip-Half-Function (Ex Series Switch Only) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

mip-half-function (EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
mip-half-function (none | default | explicit);
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Specify the OAM Ethernet CFM maintenance domain MIP half functions.
NOTE: Whenever a MIP is configured, the MIP half function value for all
maintenance domains and maintenance associations must be the same.
none —Specify to not use the mip-half-function.
—Specify to use the default mip-half-function.
default
explicit —Specify an explicit mip-half-function.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
Chapter 143: Ethernet OAM Connectivity Fault Management
4103