Table 428: Terms Configuration Parameters - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Table 427: Policies Global Configuration Parameters (continued)
Field Function
AS Path Specifies an AS path. This is
applicable to BGP only.

Table 428: Terms Configuration Parameters

Field Function
Term Name Specifies a term name.
Source tab
Family Specifies an address family protocol.
Routing Instance Specifies a routing instance.
RIB Specifies the name of a routing table.
Preference Specifies the individual preference value for the route.
Metric Specifies a metric value. You can specify up to four metric
values.
Interface Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP).
Prefix List Specifies a named list of IP addresses. You can specify an exact
match with incoming routes.
Protocol Specifies the name of the protocol from which the route was
learned or to which the route is being advertised.
3306
®
OS for EX Series Ethernet Switches, Release 10.4
Your Action
To add an AS path:
1. Click
2. Enter the AS path name.
3. Enter the regular expression and click
4. Click
To edit an AS path, click
To delete an AS path, select it and click
.
Add
OK .
Edit . Edit the settings and click
Your Action
Type or select and edit the name.
Select a value from the list.
Select a value from the list.
Select a value from the list
Type or select and edit the value.
Type or select and edit the value.
To add an interface, select
Interface
list.
To add an address, select
Select the address from the list.
To remove an interface, select it and click
Remove
Click
Add
list and click
To remove a prefix list, select it and click
Remove
Click
Add
the list.
To remove a protocol, select it and click
Remove
Copyright © 2010, Juniper Networks, Inc.
.
OK
OK .
Delete .
Add >
. Select the interface from the
Add > Address
.
. Select the prefix list from the
.
OK
.
and select the protocol from
.
.