Defining Cos Rewrite Rules (J-Web Procedure); Table 458: Rewrite Rules Configuration Page Summary - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Related
Documentation

Defining CoS Rewrite Rules (J-Web Procedure)

Table 458: Rewrite Rules Configuration Page Summary

Field
Rewrite Rule Name
Rewrite rule type
Copyright © 2010, Juniper Networks, Inc.
[edit]
user@switch# set class-of-service interfaces ge-* unit * rewrite-rules customup-rw
Defining CoS Rewrite Rules (J-Web Procedure) on page 3445
Example: Configuring CoS on EX Series Switches on page 3401
Monitoring CoS Rewrite Rules on page 3458
Understanding CoS Rewrite Rules on page 3390
You can use the J-Web interface to define CoS rewrite rules. Use the rewrite rules to alter
the CoS values in outgoing packets to meet the requirements of the targeted peer. A
rewrite rule examines the forwarding class and loss priority of a packet and sets its bits
to a corresponding value specified in the rule.
To define rewrite rules:
Select Configure > Class of Service > Rewrite Rules
1.
NOTE: After you make changes to the configuration in this page, you must
commit the changes immediately for them to take effect. To commit all
changes to the active configuration, select Commit Options > Commit.
See Using the Commit Options to Commit Configuration Changes for
details about all commit options.
Click one:
2.
Add —Adds a rewrite rule. Enter information into the rewrite rule page as described
in Table 458 on page 3445.
—Modifies an existing rewrite rule. Enter information into the rewrite rule page
Edit
as described in Table 458 on page 3445.
—Deletes an existing rewrite rule.
Delete
Function
Specifies the name for the rewrite rule.
Specifies the type of rewrite rule:
ieee-802.1 , or inet-precedence
.
Your Action
To name a rule, type the name—for example,
rewrite-dscps
dscp , Select a value from the list.
.
Chapter 115: Configuring CoS
.
3445