Security-Name (Community String) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

security-name (Security Group)
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

security-name (Community String)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
security-name security-name {
group group-name;
}
[edit snmp v3 vacm security-to-group security-model (usm | v1 | v2c)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Associate a group or a community string with a configured security group.
security-name —Username configured at the
hierarchy level. For SNMPv1 and SNMPv2c, the security name is the community string
configured at the
[edit snmp v3 snmp-community community-index]
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Assigning Security Names to Groups
security-name security-name;
[edit snmp v3 snmp-community community-index]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Associate the community string configured at the
community-index] hierarchy level to a security name.
—Name used when performing access control.
security-name
NOTE: The security name must match the configured security name at the
[edit snmp v3 target-parameters target-parameters-name parameters]
level when you configure traps or informs.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Security Names
[edit snmp v3 usm local-engine user username]
[edit snmp v3 snmp-community
Chapter 140: SNMP
hierarchy level.
hierarchy
3943