Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3411

Table 428: Terms Configuration Parameters (continued)
Field Function
Policy Specifies the name of a policy to evaluate as a subroutine.
More Specifies advanced configuration options for policies.
OSPF Area ID Specifies the area identifier.
BGP Origin Specifies the origin of the AS path information.
Local Preference Specifies the BGP local preference.
Route Specifies the type of route.
AS Path Specifies the name of an AS path regular expression.
Community Specifies the name of one or more communities.
Destination tab
Family Specifies an address family protocol.
Routing Instance Specifies a routing instance.
RIB Specifies the name of a routing table.
Preference Specifies the individual preference value for the route.
Metric Specifies a metric value.
Interface Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP).
Protocol Specifies the name of the protocol from which the route was
learned or to which the route is being advertised.
Action tab
Copyright © 2010, Juniper Networks, Inc.
Chapter 108: Configuring Firewall Filters
Your Action
Click . Select the policy from the list.
Add
To remove a policy, select it and click
.
Remove
Click for advanced configuration.
More
Type the IP address.
Select a value from the list.
Type a value.
Select .
External
Select the OSPF type from the list.
Click . Select the AS path from the list.
Add
Click . Select the community from the
Add
list.
Select a value from the list.
Select a value from the list.
Select a value from the list.
Type a value.
Type a value.
To add an interface, select
Add >
. Select the interface from the
Interface
list.
To add an address, select
Add > Address
Select the address from the list.
To delete an interface, select it and click
.
Remove
Click and select the protocol from
Add
the list.
To delete a protocol, select it and click
.
Remove
.
3307