Show Sflow Interface; Table 531: Show Sflow Interface Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show sflow interface

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 531: show sflow interface Output Fields

Field Name
Interface
Status Egress
Status Ingress
Sample rate Egress
Sample rate Ingress
Adapted sample rate Egress
Adapted sample rate Ingress
Polling-interval
show sflow interface show sflow interface
Copyright © 2010, Juniper Networks, Inc.
show sflow interface
Command introduced in Junos OS Release 9.3 for EX Series switches.
Display the interfaces on which sFlow technology is enabled and the sampling parameters.
view
show sflow on page 3894
show sflow collector on page 3896
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3873
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3878
show sflow interface on page 3897
Table 531 on page 3897 lists the output fields for the
fields are listed in the approximate order in which they appear.
Field Description
Interfaces on which sFlow technology is enabled.
Indicates whether egress sample rate is enabled.
Indicates whether ingress sample rate is enabled.
Rate at which egress packets are sampled.
Rate at which ingress packets are sampled.
Adapted rate at which egress packets are sampled.
Adapted rate at which ingress packets are sampled.
The interval at which the sFlow agent polls the interface.
Interface Status
Egress Ingress
ge-0/0/0.0 Enabled Disabled
Chapter 139: sFlow Monitoring Technology
show sflow interface
Sample rate Adapted sample rate
Egress Ingress Egress Ingress
1000 2048 1000
command. Output
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
Polling-interval
2048 20
3897