Startup-Alarm; Syslog-Subtag - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

startup-alarm

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

syslog-subtag

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3948
®
OS for EX Series Ethernet Switches, Release 10.4
startup-alarm (falling-alarm | rising-alarm | rising-or-falling-alarm);
[edit snmp rmon alarm index]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
The alarm that can be sent upon entry startup.
falling-alarm —Generated if the first sample after the alarm entry becomes active is less
than or equal to the falling threshold.
—Generated if the first sample after the alarm entry becomes active is greater
rising-alarm
than or equal to the rising threshold.
—Generated if the first sample after the alarm entry becomes active
rising-or-falling-alarm
satisfies either of the corresponding thresholds.
Default: rising-or-falling-alarm
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Sample Type
syslog-subtag syslog-subtag;
[edit snmp rmon alarmindex]
Statement introduced in Junos OS Release 8.5.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Add a tag to the system log message.
syslog-subtag syslog-subtag
to syslog messages.
Default: None
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the System Log Tag
—Tag of not more than 80 uppercase characters to be added
Copyright © 2010, Juniper Networks, Inc.