Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3991

collector
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Understanding STP for EX Series Switches on page 1751
Understanding How to Use sFlow Technology for Network Monitoring on an EX Series
Switch on page 3871
Understanding VSTP for EX Series Switches on page 1760
collector {
ip-address;
udp-port port-number;
}
[edit protocols sflow]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure a remote collector for sFlow network traffic monitoring. The switch sends
sFlow UDP datagrams to this collector for analysis. You can configure up to four collectors
on the switch. You configure a collector by specifying its IP address and a UDP port.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 64
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3873
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3878
Chapter 139: sFlow Monitoring Technology
3887