Probe-Count; Probe-Interval - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

probe-count

Syntax
Hierarchy Level
Release Information
Description
Options
Usage Guidelines
Required Privilege
Level

probe-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Usage Guidelines
Required Privilege
Level
Copyright © 2010, Juniper Networks, Inc.
probe-count count;
[edit services rpm bgp],
[edit services rpm probe owner test test-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Specify the number of probes within a test.
—A value from 1 through 15.
count
See Configuring BGP Neighbor Discovery Through RPM or Configuring RPM Probes.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
probe-interval interval;
[edit services rpm bgp],
[edit services rpm probe owner test test-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Specify the time to wait between sending packets, in seconds.
interval —Number of seconds, from 1 through 255.
See Configuring BGP Neighbor Discovery Through RPM or Configuring RPM Probes.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Chapter 141: Real-Time Performance Monitoring (RPM)
4019