Linktrace (Ex Series Switch Only); Loss-Threshold (Ex Series Switch Only) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

linktrace (EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

loss-threshold (EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
linktrace {
age (30m | 10m | 1m | 30s | 10s);
path-database-size path-database-size;
}
[edit protocols oam ethernet connectivity-fault-management]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure connectivity fault management linktrace parameters.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
loss-threshold number;
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name continuity-check]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure the number of continuity check messages that can be lost before the remote
MEP is marked as down.
—Number of continuity check messages that can be lost before the remote MEP
number
is marked down.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 4082
Junos OS Network Interfaces Configuration Guide
Chapter 143: Ethernet OAM Connectivity Fault Management
4099