Assigning Cos Components To Interfaces (J-Web Procedure) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Assigning CoS Components to Interfaces (CLI Procedure)
Related
Documentation

Assigning CoS Components to Interfaces (J-Web Procedure)

Copyright © 2010, Juniper Networks, Inc.
After you have defined the following CoS components, you must assign them to logical
or physical interfaces.
Forwarding classes—Assign only to logical interfaces.
Classifiers—Assign only to logical interfaces.
Scheduler maps—Assign to either physical or logical interfaces.
Rewrite rules—Assign to either physical or logical interfaces.
You can assign a CoS component to a single interface or to multiple interfaces using wild
cards.
To assign CoS components to interfaces:
To assign CoS components to a single interface, associate a CoS component (for example
a scheduler map named ethernet-cos-map
[edit class-of-service interfaces]
user@switch# set ge-0/0/20 scheduler-map ethernet-cos-map
To assign a CoS component to multiple interfaces, associate a CoS component (for
example, a rewrite rule named
switch, use wild characters for the interface name and logical-interface (unit) number:
[edit class-of-service interfaces]
user@switch# set ge-* unit * rewrite-rules ieee-802.1 customup-rw
Assigning CoS Components to Interfaces (J-Web Procedure) on page 3447
Example: Configuring CoS on EX Series Switches on page 3401
Monitoring Interfaces That Have CoS Components on page 3457
Understanding Junos OS CoS Components for EX Series Switches on page 3376
After you have defined CoS components on an EX Series switch, you must assign them
to logical or physical interfaces. You can use the J-Web interface to assign scheduler
maps to physical or logical interfaces and to assign forwarding classes or classifiers to
logical interfaces.
To assign CoS components to interfaces:
) with an interface:
customup-rw ) to all Gigabit Ethernet interfaces on the
Chapter 115: Configuring CoS
3447