Show Firewall - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show firewall

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
3350
®
OS for EX Series Ethernet Switches, Release 10.4
show firewall
<filter filter-name>
<counter counter-name>
<log>
<logical-system (all | logical-system-name)>
<terse>
show firewall
<filter filter-name>
<counter counter-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.3.
logical-system
option introduced in Junos OS Release 9.4.
terse
Display statistics about configured firewall filters.
—(Optional) Display statistics about configured firewall filters.
none
filter filter-name —(Optional) Name of a configured filter.
—(Optional) Name of a filter counter.
counter counter-name
logical-system (all | logical-system-name)
systems or on a particular system.
—(Optional) Display log entries for firewall filters.
log
terse —(Optional) Display firewall filter names only.
view
clear firewall on page 3348
show firewall filter on page 3352
show firewall filter (Dynamic Input Filter) on page 3352
show firewall (Logical Systems) on page 3352
Table 431 on page 3351 lists the output fields for the
are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
command. Output fields
show firewall
Copyright © 2010, Juniper Networks, Inc.