Table of Contents
Advertisement
show link-management statistics
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 506: show link-management statistics Output Fields
Field Name
Field Description
Received packets
Number of received packets by message type. If the count for a message type is zero, that message
type is not displayed. If the count for all message types is zero, this field is not displayed.
Number of received bad packets by message type. If the count for a message type is zero, that message
Received bad packets
type is not displayed. If the count for all message types is zero, this field is not displayed.
Number of packets that are too small.
Small packets
Number of packets specifying the wrong LMP version.
Wrong protocol version
Number of packets destined for an unknown peer.
Messages for unknown
peer
Number of packets indicating a state that does not match the recipient.
Messages for bad state
Number of
Stale acknowledgments
Copyright © 2010, Juniper Networks, Inc.
show link-management statistics
<peer <name name>>
Command introduced in Junos OS Release 8.0.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display statistical information for Link Management Protocol (LMP) packets.
none
—Display information for all peers.
—(Optional) Display information for all peers or for the specified peer
peer <name name>
only.
view
show link-management on page 3754
show link-management peer on page 3758
show link-management routing on page 3760
show link-management te-link on page 3765
show link-management statistics on page 3764
Table 506 on page 3763 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
and
configAck
LinkSummaryAck
Chapter 137: Operational Commands for MPLS
show link-management statistics
packets received that have a stale message ID.
3763
Advertisement
Chapters
Table of Contents
Troubleshooting
